Archive for December 22nd, 2021

In this months post we discuss common questions about DIY railing systems. Structural considerations and code concerns as well as product lines and standard spacing requirements are all addressed in the Q and A post below: Is it legal and code compliant for me to do a DIY railing? As long as a code compliant railing system can be constructed, it is perfectly legal to construct your own railings. We have a variety of wooden, steel and glass product choices for DIY installation. What tools do I need in order to install a deck railing? Minimal tooling is required to install your own deck railings. Most commonly a drill/driver, wrench set and basic hand tools, a saw and a hammer are all that’s needed to install a deck railing. Are deck railings built the same as second story balcony railings? Yes. A code compliant railing system should satisfy either scenario. A combination of the right post spacing, top railing, and infill will successfully pass a building inspection. What is the proper spacing for my railing posts? The safest short answer is not to exceed a 4′ spacing in between railing posts. Regardless of the infill choice (cable, glass, pickets, rods) this spacing should simplify your layout and satisfy building code. How many bolts do I need to use for attaching each post? A minimum of 2 bolts per post, with a minimum of 3″ of structural penetration is needed for a proper connection. This is a general rule; some aluminum systems require 3 bolts. Proven railing systems will be engineered with proper bolt sizing and counts. Can I mount railing posts to pavers or paver stones? It is not recommended to mount posts directly to paver stones which are often set in sand. The safest way to approach this is by removing the paver, setting the post in concrete, and replacing the paver stones upon completion. Are there any glass panel DIY Railing Systems available? San Diego Cable Railings furnishes modular glass railing systems that are DIY friendly. Many of the components are the same as cable railing systems. Level deck railings are a good candidate for DIY glass railing install. Stairs and angled fences may require professional installation. Can I incorporate a gate into my railing system? Yes. Gates can be used to create access points within the railing and still observe code spacing requirements. DIY mounting hardware and cable hardware is available for our gates. What is the lead time for a DIY railing system? Standard lead times for railing packages average 3-4 weeks. Stock items like a la carte railing posts or cable assemblies can be ready in as little as 1-2 weeks. Contact us at 844-277-7327 or visit our quote request page for exact lead times on specific products. Ask one of our sales associates about expedited shipping.